Configure Wireless Access
From Freespire
| Configure Wireless Access | |
|---|---|
| Home-->Documentation-->Freespire User Manual-->Common Tasks-->Internet-->Accessing the Internet-->Configure Wireless Access | < Back Forward > |
To connect to your wireless network, please follow the steps below:
1. Insert your wireless card into your computer while it is turned off.
2. Once booted up, go to your control center by clicking on Launch >> Settings >> Control Center.
3. Now click on Network >> Network Settings & Profiles.
4. Click on the Wireless tab located near the top.
5. Once here, click on the Profile option and select New Profile.
6. Enter a name for your profile.
7. Next click on the Interface option and select your wireless card.
8. Now enter the name of your wireless network in the ESSID box.
9. If you have an encryption key for your network, check the Enable Encryption box and enter your information.
10. Once done, hit OK and let the changes be saved.
If you have set up your connection correctly, the wireless signal icon in your kicker panel (bottom right) should be green.
